
Articulated Hook Spanner Set | Hook spanners with pins
Out of Stock
This product is available on request only.
Highlights
At a glance
- 3-piece articulated spanner set: Suitable for working ranges of 35–120 mm.
- Material: Made from high-quality chrome-vanadium steel and chrome-plated.
- Manufacturing method: Forged and hardened, with a high degree of dimensional accuracy.
- Design: with riveted joint and pin; suitable for use with slotted nuts with radial holes (cross-slotted nuts or DIN 1816).
- Quality: High load-bearing capacity, corrosion protection and a long service life in everyday use.
Description
Articulated hook spanners with pins are used to secure bearings on shafts, adjust spindle play or fix rotating components in place. They are also used for adjusting the steering head bearing or the spring preload of shock absorbers (suspension struts) on motorbikes and bicycles. Do’s - Choose the correct diameter: Ensure that the hook spanner is designed for the diameter of the slotted nut (e.g. 35–60 mm). The joint compensates for a great deal, but the working range must be correct. - Match the spindle size exactly: The spindle of the spanner must have exactly the same diameter as the bore in the nut. If the spindle is too small, it will have play and damage the bore; if it is too large, it will not engage deeply enough. - Apply at a right angle: Position the spanner absolutely flat and at a right angle to the nut’s axis. The spindle must sit fully in the bore, right up to the stop. - Work by pulling (pull rather than push): Always try to pull the spanner rather than push it. This way, if the tool slips, you will not injure your knuckles on the workpiece. - Secure the workpiece: Ensure that the component on which the slotted nut is fitted is firmly secured so that the force is transferred fully to the nut. - Check regularly: Check the shank and the joint for cracks, bending or excessive play before starting work. Don’ts - Do not use a hammer: Never strike the handle of a standard articulated hook spanner with a hammer to loosen stuck nuts. There are special impact hook spanners designed for this purpose. The joint may break or be knocked out of place. - Do not use pipe extensions: Do not extend the handle with a pipe to increase the lever arm. The forces generated by this can shear off the pin or destroy the joint. - Do not apply at an angle: Do not turn the nut if the spanner is only half inserted or sitting at an angle in the hole. Otherwise, the pin will slip and ‘strip’ the nut’s hole. - Do not misuse as a universal lever: Do not use the spanner for other purposes (e.g. as a crowbar or tyre lever). - Do not force seized nuts: If a nut is severely corroded or secured with high-strength threadlocker (e.g. Loctite), apply penetrating oil (rust remover) beforehand or carefully heat the component, rather than applying brute force to the spanner.
Customer Service
Frequently Asked Questions
Orders are usually shipped within 24 hours. Within Germany, delivery takes 3-5 business days. For EU countries, expect 5-7 business days.
Specifications
- Brand
- WGB Das Werkzeug
- Manufacturer
- WGB Das Werkzeug
- Height
- 32.1 cm
- Width
- 10.3 cm
- Depth
- 6.5 cm
- EAN
- 4017467514007